Benefits

AquaPure Liquid Flocculant & Clarifier will settle debris and organic matter on the pool floor within 3 to 6 hours to be vacuumed to waste.

• Ease of Application: AquaPure Liquid Flocculant & Clarifier is easier to apply compared to granular Floc, it can be poured directly into the pool water, which eliminates the need for pre-dissolving and mixing that is often required with granular Flocs. This saves time and effort during the application process.

• Faster Results: AquaPure Liquid Flocculant & Clarifier can work relatively quickly to bind fine particles and suspended matter together, forming larger clumps that can settle to the bottom of the pool more rapidly. This can lead to faster water clarification compared to granular Floc’s, which may take longer to dissolve and show effects.

• Uniform Distribution: When poured directly into the water, AquaPure Liquid Flocculant & Clarifier can spread evenly throughout the pool due to its liquid nature. This can help ensure consistent treatment and clarification of the entire pool volume, whereas granular alum might clump or settle unevenly.

• Compatible with all types of sanitisers.

How to Use:

1. Prior to adding AquaPure Liquid Flocculant & Clarifier, adjust the pH to between 7.5 and 7.8

2. Set the filter to BY-PASS or RECIRCULATE, otherwise remove filter grids prior to application

3. continue to run the filtration pump for 2 hours then turn off and allow debris to settle.

4. After the debris has dropped to the bottom of the pool, vacuum to waste where possible, clean the filter and adjust your chemicals if necessary - Never vacuum through the filter.

Dosage: 1L per 50,000 Litres of pool water

Tips:

1. Proper Dosage: Follow the manufacturer's instructions for the recommended dosage of the Liquid Flocculant & Clarifier. Adding too much Liquid Flocculant & Clarifier can lead to over-clumping and difficulty in getting correct results while adding too little might not achieve the desired results.

2. Prepare the Pool: Before adding the Liquid Flocculant & Clarifier, ensure that your pool's water chemistry is balanced and the pH has been set to the recommended range and the filtration system is clean and operational. Skim the surface of the pool and remove any large debris or leaves. This will help the flocculant work more effectively on smaller suspended particles.

3. Patience and Wait Time: After adding the Liquid Flocculant & Clarifier, be patient and give it sufficient time to work. It's generally recommended to wait overnight or at least 8 to 12 hours to allow the flocculant to bind particles and form larger clumps. Avoid disturbing the water during this waiting period, as movement can prevent effective settling.

4. Vacuuming and Filtration: After the waiting period, use a pool vacuum to carefully remove the settled particles from the pool's bottom. Gently vacuum the pool directly to waste, directing the vacuum head slowly to avoid stirring up the settled particles.

5. Aqua Pure Liquid Flocculant & Clarifier is an ideal addition to your service van. Complete treatment can usually be performed in one day or less. In addition, it saves going back to the pool the following day as is necessary with other flocs that take 24 hours to work.