- Products
- Case Studies
- News & Events
- Downloads
- Customer Service
- About Us
- Contact Us
Digichlor Mineral Chlorinator
Waterco’s new, energy-efficient Digichlor chlorinates your pool, making it healthy, crystal clear, and ready to swim all year-round. In fact, a Mineral/salt water chlorinated pool requires considerably less attention than a standard chlorinated pool.
Digichlor can work with any standard salt pool, but our engineers didn’t stop there. They specially designed it to work in synergy with Waterco’s Mineral Crystals to transform your pool into a therapeutic oasis.
-
Digichlor can work with any standard salt pool, but our engineers didn’t stop there. They specially designed it to work in synergy with Waterco’s Mineral Crystals to transform your pool into a therapeutic oasis.
-
The Digichlor Mineral Chlorinator includes an energy saving, intelligent power pack that makes it easy to keep your pool sanitised and healthy to swim in.
-
Chlorination – the main function of the Digichlor Mineral Chlorinatior is to produce chlorine to sanitise the pool water. Pool water, which contains dissolved Mineral Crystals/pool salt passes over Digichlor's chlorinator cell. This in turn splits the salt into its basic components, one being chlorine.
Waterco’s new, energy-efficient Digichlor chlorinates your pool, making it healthy, crystal clear, and ready to swim all year-round. In fact, a Mineral/salt water chlorinated pool requires considerably less attention than a standard chlorinated pool.
Features
Energy saving: Digichlor uses the latest Switch Mode Power Technology to increase energy efficiency by over 50%, significantly reducing power consumption. Digichlor draws less current and this translates to high power conversion and less energy wastage, without compromising chlorine output.
Intelligent: Digichlor’s Power Pack intelligently recognises the size of the connected chlorinator cell and automatically adjusts its power output to suit.
Salt level protection: An alarm indicates when salt levels in the pool water too high or too low. If the pool is running beyond the maximum recommended salt level, the chlorinator will limit its output to protect the chlorinator cell.
Easy-to-use timer with battery back-up: Digichlor includes an in-built easy to use timer equipped with battery backup, which will maintain settings for up to 150 hours.
Automated self-cleaning: Digichlor’s self-cleaning chlorinator cell has the added ability to reverse its polarity and automatically clean calcium build-up off its electrodes.
No flow detection: If no water flow is detected in the chlorinator cell, Digichlor automatically switches off the chlorine production to protect the chlorinator cell, and activates the No Flow LED indicator.
FAQ
- Does the Mineral Crystals / salt damage pool equipment?
No, it doesn’t. Low levels of Mineral Crystals / salt have relatively insignificant corrosive effects on pool fittings and equipment.
- How do I get started?
After setting up the salt chlorinator, you simply add recommended amount of Mineral Crystals and/or pool salt to your pool and choose your desired chlorine level.
- How much salt will I need?
To run the pool on pool salt only, add approximately 1kg of pool salt for every 1,000 lt to raise the level 1,000 ppm. Therefore, 300 kgs of salt will raise a 50,000 litre pool from 0 ppm to 6,000 ppm. If you wish to use the Waterco Mineral Crystals and take advantage of the benefits offered, then refer to the table below for recommendations on the quantity of Mineral Crystals to add to your pool.
- Is there a difference between ‘Salt Chlorinator’ chlorine and ‘normal’ chlorine?
A salt chlorinator produces chlorine the same way a chlorine factory does. The difference in the process is that it is manufactured in your pool by passing an electric current through a solution of brine (common Mineral Crystals / salt dissolved in water).
- Will I ever need to add standard pool chlorine again?
From time-to-time it may become necessary to add some chlorine to the pool. This may be due to heavy rain, excessive bather load, or if the chlorine level needs to be shocked back up.
Waterco’s new, energy-efficient Digichlor chlorinates your pool, making it healthy, crystal clear, and ready to swim all year-round. In fact, a Mineral/salt water chlorinated pool requires considerably less attention than a standard chlorinated pool.
Features
Energy saving: Digichlor uses the latest Switch Mode Power Technology to increase energy efficiency by over 50%, significantly reducing power consumption. Digichlor draws less current and this translates to high power conversion and less energy wastage, without compromising chlorine output.
Intelligent: Digichlor’s Power Pack intelligently recognises the size of the connected chlorinator cell and automatically adjusts its power output to suit.
Salt level protection: An alarm indicates when salt levels in the pool water too high or too low. If the pool is running beyond the maximum recommended salt level, the chlorinator will limit its output to protect the chlorinator cell.
Easy-to-use timer with battery back-up: Digichlor includes an in-built easy to use timer equipped with battery backup, which will maintain settings for up to 150 hours.
Automated self-cleaning: Digichlor’s self-cleaning chlorinator cell has the added ability to reverse its polarity and automatically clean calcium build-up off its electrodes.
No flow detection: If no water flow is detected in the chlorinator cell, Digichlor automatically switches off the chlorine production to protect the chlorinator cell, and activates the No Flow LED indicator.