Aqua~Health pH Increaser

Aqua Health pH Increaser is used to increase the pH of pool water. Helping protect against scaling, Corrosion, and cloudy water.

pH Increaser is can also assist in keeping the pool water comfortable for the bather.

Sign Up for Waterco Newsletter

Benefits

Aqua Health pH Increaser can be used to increase the pH of pool water rapidly with minimal effect on the total alkalinity.

  1. Contributes to bather comfort and sanitisation efficiency.

  2. Higher pH Adjustment Capability: Aqua Health pH Increaser is a stronger alkali than Alkalinity Increaser, meaning it has a higher pH and faster adjustment capability.

  3. Cost-Efficiency: Due to its higher pH adjustment capability, You would require a smaller amount of pH Increaser to achieve the desired pH change compared to using an Alkalinity increaser.

  4. Reduced Chemical Load: When using pH Increaser to achieve a certain pH level, you may need to add fewer chemicals overall compared to using an Alkalinity increaser. This can be advantageous in situations where minimizing the chemical load or the number of additives in a process or system is a priority.

FAQ’s

Q: Why would I use pH Increaser over using pool Buffer (Alkalinity Increaser)?

A: Aqua Health pH Increaser is a stronger alkali than Alkalinity Increaser, meaning it has a higher pH and faster adjustment capability. If you need to raise the pH of the pool water significantly, pH Increaser would be more effective and require less quantity compared to an Alkalinity Increaser.

Q: How do I know when to use pH Increaser to adjust the pH in my swimming pool?

A: Regular testing of your pool's water is essential. Use a reliable pH testing kit to measure the pH level of the water. If the pH falls below the recommended range, typically 7.2 to 7.6, it indicates that the water is too acidic, and you can use pH Increaser to raise the pH. Follow the manufacturer's instructions on packaging for proper dosing based on your pool's volume.

Q: How do I add pH Increaser to my swimming pool for pH adjustment?

A: To add pH Increaser to your pool, follow these simple steps:

  1. Measure the amount of Aqua Health pH Increaser needed based on your pool's volume and the manufacturer's recommendations.
  2. It’s best to Pre-dissolve the pH Increaser in a bucket of water to create a concentrated solution. This helps prevent localized pH spikes.
  3. Slowly pour the dissolved pH Increaser solution into the pool while the pump and filtration system are running. Distribute it evenly across the pool's surface.
  4. Allow the water to circulate for a few hours and then retest the pH. Repeat the process if necessary, aiming to achieve the desired pH range of 7.2 - 7.6

Available Pack Sizes:

Product Part Number Pack Size
34612 2kg

Similar products

Product Part Number Product Name
34642 Alkalinity Increaser (Bi-Carb) 2kg

Related Products

    Recently Viewed Products

      Copyrights© 2024 Waterco | Website Development by Stimulus
      Follow us