Introducing the Electroheat ECO-VS Pool Heat Pump: Elevate Your Pool Experience
The Electroheat ECO-VS pool heat pump range redefines pool heating with its innovative inverter technology and whisper-quiet operation. These high-performance heat pumps are designed to efficiently heat and cool your pool, ensuring optimal water temperatures year-round. With its cutting-edge inverter technology, this heat pump offers precise temperature control and energy savings, making it the ideal choice for discerning pool owners.
Compared to gas and electric heaters,the Electroheat ECO-VS WIFI heat pump range use just a fraction of the energy to generate the same amount of heat and unlike solar heating; there is no reliance on the sun as the latent heat in the air is absorbed. The Electroheat ECO-VS heat pump is energy-efficient and environmentally friendly, capable of converting 1 kW of electricity into up to 12.5 kW of heat energy running at 50% speed.
Take control of your pool climate from anywhere with Wi-Fi enabled Waterco Electroheat ECO-VS pool heat pumps. Simply connect your heat pump to your home Wi- Fi and download the free Invergo app. This user-friendly app allows you to remotely monitor and adjust your pool temperature, ensuring a comfortable swim whenever you desire.
Introducing the Electroheat ECO-VS Pool Heat Pump: Elevate Your Pool Experience
The Electroheat ECO-VS pool heat pump range redefines pool heating with its innovative inverter technology and whisper-quiet operation. These high-performance heat pumps are designed to efficiently heat and cool your pool, ensuring optimal water temperatures year-round. With its cutting-edge inverter technology, this heat pump offers precise temperature control and energy savings, making it the ideal choice for discerning pool owners.
Key features:
The Electroheat is designed for outdoor installation and should not be installed in totally enclosed areas such as a shed, garage, etc., unless mechanical ventilation is provided to ensure adequate air exchange for proper operation. Re-circulation of cold discharged air back into the evaporator coil will greatly reduce unit’s heating capacity and efficiency.
Solar
• Fuelled by the power of the sun, solar heating systems are a low-cost method of heating up your pool water.
• As solar heating is reliant on the sun, they are best used to extend the swimming season.
• Virtually no operating costs, just the cost of electricity to pump the pool water through the solar absorber on the roof.
Gas heaters
• Gas heaters are the fastest method for heating your pool, providing a comfortable temperature for swimming on demand. Gas is best for heating pools or spas for short periods of time.
• Gas heaters can easily maintain any desired temperature regardless of the weather.
• Gas heaters are effective, but expensive to operate.
Heat pumps
• Heat pumps may not heat up the swimming pool as fast as gas heaters, but are more energy efficient.
• Heat pumps require a small amount of electricity; its heat energy source is extracted from the ambient ai
The most effective way to prevent heat loss is to install a pool cover. An un-blanketed pool loses 2-3 times more heat than a blanketed pool. Pool covers virtually eliminate evaporation and reduce heat loss by insulating the surface of the pool, greatly reducing pool heating costs. As with all pool heaters, it would be advisable to use a pool cover at night, and when the pool is not in use.
The location of the Electroheat is very important in keeping installation costs to a minimum, while providing for maximum efficiency of operation as well as allowing adequate service and maintenance access.
The unit should be located as close as practically possible to the existing pool pump and filter to minimise water piping. The use of 90 degree bends and short radius elbows in the water piping should be kept to a minimum. The longer the distance from the pool, the higher the heat loss from the piping.
Most units should be sized to operate during the pool filtering cycle time of 8 - 12 hours daily (Winter - 8hrs, Summer - up to 12hrs), providing a steady flow of heated water. On warmer days the heater will run less because the heat loss will be less.
Electroheat heat pumps have a lower heating capacity on a BTU/hr basis compared to fossil fuel based pool heaters such as gas heaters. Therefore, Electroheat heat pumps require longer operation to accomplish the desired temperature.
If your heat pump is sized and installed correctly, between 10°C to 18°C, it will increase your water temperature by 3°C to 5.5°C a day. Over 21°C you should obtain an increase up to 0.8°C a hour and over 26°C up to 1.1°C an hour depending on the size of the pool, the size of the heat pump, the water temperature, and the ambient air temperature at the moment of operation. Even though the Electroheat may require longer operation, it will still heat the pool far more economically.
Performance will fluctuate depending on water and weather temperatures. 5 important factors determine the performance of Electroheat:
1. Size of the pool
2. The desired temperature of the pool
3. Ambient air temperature - the warmer the air, the better the performance
4. The presence of a pool cover
5. The size of the heater
The heat pump will actually operate down to an ambient air temperature of 10°, but with minimal heat output. Therefore we recommend that the minimum operating temperature should be 10°.
Introducing the Electroheat ECO-VS Pool Heat Pump: Elevate Your Pool Experience
The Electroheat ECO-VS pool heat pump range redefines pool heating with its innovative inverter technology and whisper-quiet operation. These high-performance heat pumps are designed to efficiently heat and cool your pool, ensuring optimal water temperatures year-round. With its cutting-edge inverter technology, this heat pump offers precise temperature control and energy savings, making it the ideal choice for discerning pool owners.
Key features: